EN Sole Flexing Tester

This tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.

1.Body paint baking processed, easy for maintenance.
2.Fixture in aluminum material and surface processed with oxidation.
3.Equip with digital counter, automatically stop after test finished.

Key Specification

Model GT-KB06A GT-KB06B
Test position 3 6
Bending angle 90±2 °
Bending speed 125-150cpm
Mandrel diameter 30 mm
Clamps apart 110±1mm
Movable fixture stroke 41.5 ± 0.5 mm
Counting LCD, 0-9999999
Power supply 1∮AC 220V 50/60HZ
Dimensions 105x42x55cm 105x70x55cm
Weight 80kg 100kg
Standards SATRA TM161, ISO 17707, ISO20344 section8.4.2 , ISO20347 section 5.8.4, AS/NZS 2210.2 section8.4.2 GB/T 20991section8.4.2, QB/T 2885, DIN 53543
Related products
Inquiry Form