Home » Products » Furniture Testing Machine » Chair Testing Equipment » Chair Armrest and Seat Front Edge Testing Machine GT-LB03S

Chair Armrest and Seat Front Edge Testing Machine GT-LB03S

    Chair Seat Pad and Back Testing Machine
    Chair Seat Pad and Back Testing Machine

the handrails, seats, or other parts by simulating the loading of the seats during routine use.
The machine is equipped with two drive units, and can be individually controlled to repeatedly load the test points of the seat.

Through the setting for different parameters, the machine can complete following testing on the seat:
1. Vertical static load test towards armrests;
2. Handrail durability test by enforcing an external force (10 degree from plumb line) on it
3. Seat front edge static load and durability tests;
4. Vertical static load test on backrests;
5. Foot rest static load and durability testing;
6. Leg rest static load test;
7. Armrest upward static load test (need to tie the weight test);
8. WordPad vertical static load and durability test.

1. The main structure of the testing machine is made of aluminum profile, beautiful and easy to maintain.
2. Servo motor is introduced as the drive unit, which leads to a more accurate load test and smaller noise.
3. Using PLC (programmable logic controller) for touch screen controlling, allowing a more convenient operation.
4. In addition, electronically controlled loading system is adopted, so the testing room is largely saved.

Key Specification
Model GT-LB03S
Load capacity 2000N
Loading unit stroke range 0-80cm
Stroke range 60-160cm
Load Angle 0~10o(The angle to the vertical is adjustable)
Test speed 5~40 times/min
Testing times 0-99999 (adjustable)
Control method PLC control
Dimension (WxDxH) 150×150×190cm
Weight 350kg
Power 1∮, AC 220V 50Hz
Standards EN 1728-2012 Section 6.6,6.8, 6.9, 6.11, 6.12, 6.13,6.14, 6.18,6.20, 6.21 ,6.22, 7.4, 7.5, 7.6, 7.8, 7.10 , 7.12
EN1335-3 -2009 Section 7.2.1, 7.2.3, 7.2.4, 7.2.6, 7.3.2,7.3.4,
EN 1729-2-2012 Section 5.3.4, 5.3.9,5.3.11, 5.3.12
EN581-2-2015(corresponding with EN1728-2012),
ISO 7173-1989 Section 7.1, 7.4
GB/T 10357.3 Section 4.3.3, 4.4, 4.6, 4.9,
QB/T 2280-2007 Section 6.6.5, ( Load pad (optional) is required)
BIFMA X5.1 - 2011 Section 21,(11.4,19, 20, 23,24 Load pad (optional) is required)
EN 16139-2013 (corresponding with EN1728-2012)
BS5459-2-2000 Section A5.5, A7.3
Standard Accessories GT-LB01-2A Seat loading pad 1 pc, GT-LB01-3 Smaller seat loading pad 2 pcs, GT-LB01-5 Local loading pad 2 pcs, Arm rest loading pad 2pcs, Stationary fixture 1 pc Stops 2pcs
Optional Accessories GT-LB01-1A Loading point template 1 pc, GT-LB01-8 203mm loading pad ( BIFMA X5.1-11.4, 23,24) 2pcs, GT-LB01-9 BIFMA102&50mm loading pad( BIFMA X5.1-19,20) 2pcs
Related products
Inquiry Form